Board of Directors


Thomas R. Kurfess

Dr. Thomas R. Kurfess, Ph.D.

President of the Board

Dr. Kurfess is the Chief Manufacturing Officer of the Georgia Institute of Technology, and the Executive Director of the Georgia Tech Manufacturing Institute. At Georgia Tech he is the HUSCO/Ramirez Distinguished Chair in Fluid Power and Motion Control and Regents’ Professor of Mechanical Engineering. He also serves as the Chief Technology Officer at the National Center for Manufacturing Sciences.

During 2019-2021 he was on leave serving as the Chief Manufacturing Officer and the Founding Director for the Manufacturing Science Division at Oak Ridge National Laboratory, where he was responsible for strategic planning in advanced manufacturing.

During 2012-2013 he was on leave serving as the Assistant Director for Advanced Manufacturing at the Office of Science and Technology Policy in the Executive Office of the President of the United States of America. In this position, he had responsibility for engaging the Federal sector and the greater scientific community to identify possible areas for policy actions related to manufacturing. He was responsible for coordinating Federal advanced manufacturing R&D, addressing issues related to technology commercialization, identifying gaps in current Federal R&D in advanced manufacturing, and developing strategies to address these gaps.

He served as the President of the American Society of Mechanical Engineers in 2023-2024 and was President of the Society of Manufacturing Engineers in 2018.

He presently serves as an appointed member of the U.S. Department of Energy, National Nuclear Security Administration, Advisory (NNSA) Committee for Nuclear Security.

He has also served as an appointed member of the U.S. Department of the Navy’s Science and Technology Board federal advisory committee. His research focuses on the design and development of advanced manufacturing systems targeting secure digital manufacturing, additive and subtractive processes, and large-scale production enterprises.

Dr. Kurfess is an elected member of the National Academy of Engineering and is a Fellow of ASME, AAAS, and SME. He is a member of the NASEM National Materials and Manufacturing Board, the NASEM Laboratory Assessment Board, and is the Chair of the NASEM Standing Committee for Defense Materials, Manufacturing and its Infrastructure.

He received his S.B., S.M. and Ph.D. degrees in mechanical engineering from M.I.T. in 1986, 1987 and 1989, respectively. He also received an S.M. degree from M.I.T. in electrical engineering and computer science in 1988.

Dr. Li

Dr. Jianzhi (James) Li, Ph.D.

Treasurer

Dr. Jianzhi (James) Li, Ph.D. serves as STAMP’s Treasurer. He is the inaugural director of the UTRGV Institute for Advanced Manufacturing (IAM). He also holds the President’s Endowed Professorship. Dr. Li received his Bachelor of Science degree in Automotive Engineering and Master of Science degree in Manufacturing Engineering, both from Tsinghua University, China. He received his Ph.D. in Industrial and Manufacturing Engineering from Texas Tech University. Dr. Li has more than 20 years of leadership and research experience in the areas of advanced materials, additive manufacturing, renewable energy, AI in manufacturing, and recycling and other sustainable manufacturing practices. He has eight years of industry experience, including business incubation and serving as a Chief Technology Officer in the IT industry.

As the director of UTRGV IAM, Dr. Li is leading a team of researchers who contribute to building a world-class American manufacturing base by merging engineering disciplines that, together, support excellence of Advanced Manufacturing in the State of Texas, the U.S. and beyond. Under his leadership in rigorous research, targeted education, and broad outreach in defense materials, energy manufacturing, and beyond, IAM became a cornerstone of manufacturing innovation, providing pivotal community support for innovation, fostering advancements that resonate with societal needs and technological progress.

Since 2019, Dr. Li has been leading a Department of Defense funded I-DREAM4D, a national consortium for Innovation Driven Research/Education Ecosystem for Advanced Manufacturing for Defense. Through research, education and exposure programs, the consortium contributed to solving the talent needs for US military and US defense manufacturing operations. Recently, Dr. Li was leading the America’s Additive Foundry Consortium (AAF) which was designated as a Defense Manufacturing Community in FY 2023 by the DoD. The consortium is composed of higher education institutions, Manufacturing USA Institutes, ARL, and local governments to address casting and forging supply chain issues facing the U.S. military. AAF is the first-ever national consortium created to secure tactical alloys supply chains through establishment of technical hubs; offering certificate/training programs to members of the academic and industrial sectors; and business incubation and support for small and medium local manufacturers.

Dr. Li has maintained a distinguished scholarly record, while devoting strong efforts to developing programs that benefit the institution and the manufacturing community at large. In various roles, he has conducted research/development projects supported by DoD, Army, DOE, NNSA, DOL, NSF, and Texas ATP/ARP. His research also includes numerous industry projects sponsored by industry partners such as Dell, Caterpillar, EOS, GE Aerospace, Raytheon, ALPS automotive, Honeywell, and others.

Rolando Gonzalez

Rolando A. González Barrón

Entrepreneur in Residence, Senior Advisor Manufacturing

Rolando A. González Barrón serves as STAMP’s Entrepreneur in Residence and Senior Advisor for Manufacturing.

Born on May 14, 1952, in Matamoros, Tamaulipas, Mexico, Ing. Rolando A. González Barrón is an American citizen and a distinguished Brownsville–Matamoros entrepreneur in the maquiladora sector with more than 40 years of professional experience.

Thanks to his strong leadership and remarkable ability to build partnerships, he has successfully founded a group of companies with operations in both Mexico and the United States. He owns two plants in Brownsville, Texas — GOBAR Systems Inc. and Border Manufacturer LLC —, three in Matamoros — Industrias GOBAR, Silicon Technologies, and Manufacturas y Ensambles de la Frontera —, and one in Celaya, Guanajuato — GOBAR Systems Celaya. Collectively, his companies employ over 1,300 workers.

Beyond the manufacturing industry, Rolando has also expanded his entrepreneurial vision into other sectors. He operates customs brokerage agencies — Rare Import Export in Brownsville, Texas, and Agace in Matamoros, Tamaulipas — and participates in the service sector through Top Cal, a calibration laboratory that supports industrial quality and compliance.

Throughout his career, his deep commitment to the export manufacturing industry has led him to serve as President of the National Council of the Maquiladora and Export Manufacturing Industry (INDEX Nacional) — an organization that brings together over 1,200 companies generating more than 10 million direct and indirect jobs across Mexico — as well as President of the Matamoros Maquiladora Association on three different occasions. During his tenure, he spearheaded the creation of the Innovation Center, a landmark initiative that strengthened the technical capabilities of maquiladora companies through modern equipment and specialized training.

His leadership and contributions have earned him multiple accolades throughout his career. Most recently, he received the Distinguished Member Award from INDEX Nacional during its latest annual convention, honoring his lifelong commitment to advancing the export manufacturing industry in Mexico.

Deeply committed to social responsibility and education, Rolando has supported local institutions such as the Tecnológico de Matamoros, donating laboratory equipment and promoting academic collaboration. He currently serves as President of the Industry–Academia Liaison Committee, fostering stronger ties between industry and education. Moreover, he has been an active contributor to the “Adopt a School” program, which he personally initiated nearly 30 years ago to support the improvement of public education and strengthen community development.

His philosophy is based on the development of new local leaders and entrepreneurs to strengthen the regional economy and improve the living conditions of workers. Rolando believes that sustainable progress depends on empowering people, promoting education, and cultivating innovation at the community level.

He earned his Bachelor’s degree in Engineering from the Universidad Autónoma de Nuevo León (UANL) and a Master’s in Business Administration from the University of Texas–Pan American (UTPA).

Happily married, he is the proud father of three children and grandfather of two. In his free time, he enjoys reading and following politics.

Beatrize Valenzuela

Beatrize Valenzuela

Secretary, STEM Advisor

Beatrize Valenzuela is a visionary education leader dedicated to advancing regional prosperity through STEM education, workforce alignment, and strategic partnerships. She currently serves as a STEM Specialist for the GEAR UP: Pathways to the Future! grant at Region One Education Service Center, where she leads initiatives that bridge education and industry to cultivate a highly skilled workforce in South Texas. Her work focuses on strengthening career pathways in high-demand sectors such as advanced manufacturing, engineering, and healthcare, ensuring that students from rural and underserved communities have access to opportunities that lead to meaningful, sustainable careers.

With more than 19 years of experience in education, Beatrize brings a deep understanding of classroom instruction, curriculum innovation, and systemic improvement. Before joining Region One ESC, she served as an educator in La Joya ISD, where she was recognized as Teacher of the Year four times for her excellence in teaching and dedication to student growth. Drawing on her experience at both the classroom and systems level, she now works closely with district leaders, postsecondary institutions, and industry partners to develop programs that align with regional workforce needs and foster long-term economic growth.

Beatrize earned her Bachelor of Arts from DePauw University in Greencastle, Indiana, in 2003 and a Master’s degree in Education with a specialization in Curriculum and Instruction from the University of Texas Rio Grande Valley (UTRGV) in 2018. She is currently pursuing a Doctor of Education (Ed.D.) in Curriculum and Instruction at UTRGV, where she also serves as a research assistant for multiple grants aimed at increasing and sustaining the participation of underrepresented students in STEM fields. Through her research, she contributes to the development of evidence-based practices that promote equity, innovation, and workforce readiness across the region.

As a first-generation college graduate, Beatrize is deeply committed to expanding access to education and opportunity. Her work is guided by the belief that regional transformation begins with empowering students and communities through high-quality, future-focused learning experiences. In her role as a board member, she leverages her expertise in curriculum design, community partnerships, and STEM pipeline development to advance the organization’s mission of growing the region’s capacity in advanced manufacturing and preparing the next generation of skilled professionals.

Ross T. Guieb

Senior Advisor

Retired Colonel Ross T. Guieb serves as a Senior Advisor to STAMP for national security, defense innovation and dual-use technologies.

Ross Guieb is the Executive Director for the George H.W. Bush Combat Development Complex (BCDC) at the Texas A&M University System RELLIS Campus in Bryan, Texas. He provides oversight of a unique ecosystem of state-of-the-art facilities, researchers, staff and faculty, organized and focused to accelerate priority Department of Defense technologies from the lab to the field. This includes developing strategic partnerships across DoD, academia, and the defense industrial base. BCDC represents a more than $200M combined investment from the Texas A&M University System, State of Texas, and Army Futures Command.

A decorated combat Veteran, Ross retired in 2020 as a Colonel with 29 years of service in the U.S. Army. As a Senior Staff Executive, Ross played an instrumental role in the development of the new Army Futures Command and the reorganization of the Army’s modernization enterprise, and brings to the Texas A&M University System tremendous insight on how to best support national security research priorities. Ross’s leadership was key to imagining future combat scenarios and backing those possibilities into a revised R&D portfolio strategy, investment roadmap, and consolidation of the Army’s R&D organizational capabilities into the new Army Futures Command. His core competencies include a proven ability to build and transform organizations and to influence and sell new concepts.

Ross holds a Bachelor of Arts in International Relations from the University of California, a Masters of Arts in Business and Organizational Security Management from Websters University, a Masters of Science in Adult Education from Kansas State University and a Masters of Science in National Security Policy and Resource Strategy from the Eisenhower School at the National War College. He is also a graduate of the FBI Academy, and received professional certification from the University of St Andrews (Scotland) Centre for the Study of Terrorism. Ross was awarded the Distinguished Service Medal, Legion of Merit (x3), and Bronze Star (x3). Ross was also awarded the Key to the City of London and Her Majesty the Queen’s Golden Jubilee Medal.

Executive Team


Angela-Pack-Zia

Angela Pack-Zia

Director of Programs

Angela Pack-Zia serves as STAMP’s Director of Programs, relying on two decades of experience in international business development, supply chain management, and economic development. Angela brings expertise in applied economic analysis, strategic planning, and program and personnel management.

She holds a Master of Public Affairs from the LBJ School of Public Affairs at The University of Texas at Austin and is fluent in both English and Spanish. Her diverse industry background, including global semiconductors, IoT and water quality instrumentation, combined with her community work as the founder of Think Bilingual Austin, reflects a strong commitment to fostering economic growth, technological advancement, environmental stewardship, and cultural awareness in both business and community.

Guided by integrity, professionalism, and discretion, Angela consistently delivers high-quality, results-driven services through clear vision and strategy, effective communication, and impactful execution.

Sean Herrity

Sean Herrity

Director of Investment Attraction & Strategy

Sean Herrity serves as STAMP’s Director of Investment Attraction & Strategy, leveraging his expertise in US trade, market entry services, international sales and business development. He is an advisor to foreign corporations and government agencies seeking to invest and do business in Texas and across the United States. In this capacity, he is working to help companies land, expand and command success in South Texas.

As a US citizen with over 20 years of international work experience in Germany, across Europe and Asia-Pacific, Sean brings a wealth of knowledge in how to do business across borders and cultures. His network and industry experiences span across diverse sectors including digital media and advertising, manufacturing, real estate, agriculture, viniculture, transportation, logistics, environmental science, consumer goods, renewable energy, healthcare, biotech and life sciences.

Sean is active across the greater Texas business community and serves on a number of boards, including the Austin Sister Cities International and the German-Texan Heritage Society. He is a member of BioMedSA, the US India Chamber of Commerce in Austin, the Greater Austin Asian Chamber of Commerce, the Austin Chamber of Commerce, International Executive Resource Group, and American Business Network.

He holds an MBA in International Business from Pepperdine University and the European Business School in Oestrich-Winkel, Germany, as well as a Bachelor of Arts in Environmental Studies from the University of California, Santa Barbara. Sean is fluent in German, Croatian an English.